|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: pic: 5107 CAD Progress
Awesome Design! I like its simplicity. I assume the claw can be rotated near vertically to fit within the frame perimeter?
|
|
#2
|
||||
|
||||
|
Re: pic: 5107 CAD Progress
When you lift your arm up, is the ball only supported by the two bottom posts, or is there another mechanism not included in the render? If so, what happens if a robot runs into you after you lift your arm up? What happens if you come to a quick stop?
Last edited by Ty Tremblay : 22-01-2014 at 12:39. Reason: clarification |
|
#3
|
|||||
|
|||||
|
Re: pic: 5107 CAD Progress
Quote:
As a reminder, you have to be inside the frame perimeter at the start, and within 20" horizontally of it during the rest of the match. You're looking mighty close to that, though some of that might just be the angle. BTW, I see a distinct similarity to a robot that is in the top 3 of all time in FRC. That, along with the detailed CAD, kind of scares me--in a good way, of course! I'll have to check y'all out in Inland Empire. Last edited by EricH : 23-01-2014 at 00:46. |
|
#4
|
||||
|
||||
|
Re: pic: 5107 CAD Progress
WOW top three robots in FRC history that is intense did not know there was a hall of fame I will have to check that out. We tested both springs and surgical tubing and had success with both so we made it so both can be used. As for the 20" extending from the frame perimeter it is two inches under and that was not by accident either lol. Thank you for all of the positive support really means a lot coming from veteran teams.
|
|
#5
|
|||||
|
|||||
|
Re: pic: 5107 CAD Progress
Quote:
On the other hand, the all-time top 3 ROBOTS is a bit of an informal "who do you think?" type of discussion, and generally includes team 71 in 2002, and tends to include 1114 in 2008 (which is the one I was referring to); the third robot is under debate from time to time, but nobody really has an answer. Yet. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|