|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
pic: SolidWorks Electrical KOP - Beta
|
|
#2
|
||||
|
||||
|
Re: pic: SolidWorks Electrical KOP - Beta
This...This changes everything. Really looks nice guys.
|
|
#3
|
||||
|
||||
|
Re: pic: SolidWorks Electrical KOP - Beta
Looks pretty slick. Does this interface with regular SolidWorks?
|
|
#4
|
|||||
|
|||||
|
Re: pic: SolidWorks Electrical KOP - Beta
We're just at the start of the learning curve - our electrical team is particuarly CAD-deficient - and find the curve to be not as steep as expected.
More soon, but what I am tasking electrical with is to stake out their space on the robot, so the mechanical gorillas can use their stone knives and axes to beat their mechanisms into some functional shape without touching our stuff... ![]() |
|
#5
|
|||
|
|||
|
Re: pic: SolidWorks Electrical KOP - Beta
Thank you. This is a new cad beginning.
|
|
#6
|
|||
|
|||
|
Re: pic: SolidWorks Electrical KOP - Beta
Yes. SolidWorks Electrical interfaces with SolidWorks bidirectional.
SolidWorks Electrical Schematic 2D can run independently. You need to install SolidWorks Electrical separate serial number. |
|
#7
|
|||
|
|||
|
Re: pic: SolidWorks Electrical KOP - Beta
Quote:
The challenge is you need to know all the pinout from the 2D symbol or it won't route correctly into 3D. This has been a challenge for us. We should have purchased a kit. |
|
#8
|
|||||
|
|||||
|
Re: pic: SolidWorks Electrical KOP - Beta
Please remind them not to bury the D-Link router deep in the robot. Have them find a place up high where its radio antennas won't be bothered by proximity to the cRIO, battery, speed controllers, 12v-to-5v converter, motors, or metal framing.
|
|
#9
|
|||
|
|||
|
Re: pic: SolidWorks Electrical KOP - Beta
One of our electrical engineers asked if the current layout of the kitbot would produce noise. I'm not certain if the DLink is too close to other NI components.
|
|
#10
|
||||
|
||||
|
Re: pic: SolidWorks Electrical KOP - Beta
When the rookies put together our KOP base, they wedged the router between the sheet-metal frame and the battery. Not so good to place your antenna up against 13lbs of lead
![]() |
|
#11
|
||||
|
||||
|
Re: pic: SolidWorks Electrical KOP - Beta
I can't be the only one confused about the wire running straight through the 40-amp breakers, can I?
Anyway, I look forward to using SolidWorks Electrical next year. It seemed like a bit too much to learn in too little time for this year. |
|
#12
|
|||
|
|||
|
Re: pic: SolidWorks Electrical KOP - Beta
Quote:
Looks awesome! |
|
#13
|
|||||
|
|||||
|
Re: pic: SolidWorks Electrical KOP - Beta
Quote:
![]() |
|
#14
|
||||||
|
||||||
|
Re: pic: SolidWorks Electrical KOP - Beta
I'd be more worried about it being next to the Jaguars and that big hunk of lead (battery).
|
|
#15
|
||||
|
||||
|
Or one or more CIM motors.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|