|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Hi!
Is it legal to connect two regulators and two solenoids to one piston? See attached .png. - Kapua |
|
#2
|
||||
|
||||
|
Re: Air Pressure Question
4.10.17 R90
The outputs from multiple valves may not be plumbed together. So that is a no on the multiple solenoids. You would have to use multiple pistons to use multiple solenoids. |
|
#3
|
||||
|
||||
|
Re: Air Pressure Question
Thanks Trent! Guess we'll use a back up plan.
- Kapua |
|
#4
|
|||
|
|||
|
Re: Air Pressure Question
We were looking into the same question/rule,
What is your plan B? One idea thrown out was to run a Parker valve with a servo. Don't know? We ordered a smaller diameter bore, as we are using 1 1/2", 9" shaft to work with while the 1 1/6" makes their way to Colorado. Thanks! |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|