|
Re: pic: VexPro out of stock? No problem.
Thank you guys. That's what I figured anyway, but wanted reassurance from someone who has done it.
As for how we held them, we made a fixture plate with a protrusion that had a nice fit on the gear counter-bore. We then had a bolt pattern around the outside diameter of the gear and clamped it down with the head of the screws. You can see in the teeth of the gear where we clamped. We did multiple holes so we can put the same pocket on any size gear up to 60 teeth using the same fixture.
__________________
Team 1251 The Techtigers
2010 FL Regional Winner (BIG thanks to 86 and 1612)
2009 FL Regional Finalist (BIG thanks to 79 and 744)
2008 FL Regional Winner, FL GM Industrial Design, SC GM Industrial Design
2007 FL Regional Winner, FL GM Industrial Design, Palmetto Regional Finalist, Palmetto Motorola Quality.
2006 Palmetto Regional Winner, Daimler Chrysler Team Spirit Award
2005 FL Regional Judges Award, FL Regional 3rd seeded and finalist, Palmetto Regional Xerox Creativity Award, Palmetto Regional 1st seeded and finalist
2004 UCF Regional Rookie All-star Award
|