[FTC]: Lag Issues Believed to be Not Associated With Samantha

[jcarr]

Most times that I have seen the lagging problem, it was because Bluetooth was left on. It should be disabled when you do your software inspection (through the NXT screen) and left off for the duration of the tournament.

[pyroslev]

I've also seen lag due to coding.

RobotC usually cause there is a unused pragma that is not commented out.
Labview cause there was too much code on it.

If you don't need it on the brick for the competition, comment it out or leave it off.

[ftcTeam6389]

Originally Posted by pyroslev

I've also seen lag due to coding.

RobotC usually cause there is a unused pragma that is not commented out.
Labview cause there was too much code on it.

If you don't need it on the brick for the competition, comment it out or leave it off.

@pyroslev - By "unused Pragma" do you mean like if I set up motor controllers and motors and sensors in the "Motors and Sensors Setup" window, but then those motor controllers and motors and sensors aren't actually connected to the NXT and there is no code for them in my program?

- Team 6389

[ftcTeam6389]

I have also experienced this in the past, although not this year. I've never really found a good explanation that is testable and repeatable.

- Team #6389