Black Jaguars bricked after 2CAN update

[Cecil]

When you test this, are you opening the "Robot Main.vi" and running it continuously, or are you actually building the code and setting it to run at startup?

[Peleg2230]

We just ran the "Robot Main.vi", enabled the code and changed parameters at the "Teleop.vi".

[Alan Anderson]

Are there any messages in the Driver Station's diagnostic window?

[Peleg2230]

I just checked the log files, we got error -44079, the firmware of the jaguar needs to be upgraded. But that returning us to the original post, how can we do it safely without bricking the Jags again?

[Cecil]

My preferred way is to update them one at a time using BDC-Comm. It reduces the chances of failure, and is using a native tool built specifically for these controllers.

[Peleg2230]

We will try that later today and update you with the results.
Thank you all very much!

[Peleg2230]

We managed to make the CAN working
Thank you very much for the help and support.

[dalbert]

I know this is an old thread, but does anyone where I can download 2CAN firmware and the 2CAN firmware utility? Thank you!