How much does your robot weigh? - Page 2

Ricky Q. · #16 14-02-2003, 09:40

Amazingly enough, we weighed in yesterday at 128.6 lbs, we thought for sure we we're gonna be over, we have a gearbox with 2 drill motors on it and a 100tooth steel gear, it alone weighs 22lbs

Greg Perkins · #17 14-02-2003, 09:50

Quote:

Originally posted by Ricky Q.
Amazingly enough, we weighed in yesterday at 128.6 lbs, we thought for sure we we're gonna be over, we have a gearbox with 2 drill motors on it and a 100tooth steel gear, it alone weighs 22lbs

I doubt your gear weighs 22 pounds, we used a hundred tooth geasr last year and it only weighed 3 pounds

Bad

#18 14-02-2003, 10:02

Quote:

Originally posted by badjokeguy
I doubt your gear weighs 22 pounds, we used a hundred tooth geasr last year and it only weighed 3 pounds

Bad

The Gear doesn't weigh 22 pounds, the 2 drill motors and the gear do

Plus its made of steel...

Ricky Q. · #19 14-02-2003, 10:16

Quote:

Originally posted by D.J. Fluck
The Gear doesn't weigh 22 pounds, the 2 drill motors and the gear do Plus its made of steel...

Yea, and the plates and the other gears, its a 40:1 reduction

camtunkpa · #20 14-02-2003, 10:18

Earlier in the build season we were looking at weight as a major issue because our wheels weighed 16 lbs all together, but we are skimming under the weight limit and no speed holes

Jferrante · #21 14-02-2003, 13:25

um. I think we had antigravity last year.

gonna have to figure out how we did it.

Seriously, the started at just under max the day of the competition, and as we added stuff we kept weighing it and every time the weight went down... Maybe the wires were rant in just the perfect way that the electromagnetic field created by them caused the scale to become semi-magnetic and repulse itself, thus causing the weight to seem less, and each time we added stuff the additional metal must of helped strengthen the magnetic field... or something like that.

Lauren Hafford · #22 14-02-2003, 13:41

hahaha, that's awesome! that's kind of what happened to us last year too....

but, you see, we don't know how much we weigh for sure (I bet it's over anyway) because as of today, we don't even have a DRIVING ROBOT YET!!!!! aaaaaaaaaaack!!!! and it's what, 5 days till ship????? PLUS, we have an arm that needs to be put together!!!!! i don't think we'll make it this year.....thurs. will have to be a very magical day!!

sleep-deprived,
lauren

View Poll Results: How much does your team's robot weigh?
More than 135 pounds	11	11.22%
Between 130 and 135 pounds	11	11.22%
Exactly 130 pounds	7	7.14%
Between 125 and 130 pounds	18	18.37%
Between 100 and 125 pounds	23	23.47%
Between 75 and 100 pounds	10	10.20%
Less than 75 pounds	3	3.06%
There's a weight limit in the rules?	1	1.02%
We're too busy building a robot to worry about weight!	9	9.18%
We have an anti-gravity module...	5	5.10%
Voters: 98. You may not vote on this poll

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How much planning goes into your robot?	Jnadke	General Forum	41	29-01-2006 21:29
serious problem found - robot controller resets when jarred!	KenWittlief	Electrical	23	19-03-2003 13:30
WASH Palm scouting at the Championship	Mike Soukup	Scouting	2	19-04-2002 15:14
Index of team's post about their robot...	Ken Leung	Robot Showcase	1	20-03-2002 17:10
about how Drive Train push the robot... shouldn't the force accelerate the robot?	Ken Leung	Technical Discussion	12	26-11-2001 09:39