Driver Station doesn't communicate with D-Link

[Alan Anderson]

Originally Posted by akavoor13

The PC sees the radio, but the Driver Station doesn't.

What does "see" mean here?

[akavoor13]

The "bridge" light on the DS panel doesn't turn on. The internet was originally disabled on the PC I am working with. After I enabled internet connectivity, I wasn't able to "communicate" (on the DS) with the cRIO.

[Mark McLeod]

To use the Internet you probably changed the PC's IP to DHCP.
That would stop the PC from communicating with the rest of the robot network (bridge,cRIO).

The PC IP needs to be 10.48.56.5 (wired) or 10.48.56.9 (wireless) to act as a Driver Station.