|
|
|
 There is almost always more than one solution to any engineering problem. One part of elegant design is picking the one that makes the most sense for a particular design problem, even if that means "breaking" some normally established "rules". - Jeff Pahl [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
375 Key Hub
I was trying to download the 375 key hub of AndyMark, however every time I try to download the step file, it just opens the product in another tab. Does anyone have a fix for this or happen to have the file they could send me??
|
|
#2
28-01-2014, 00:42
|
|||
|
|||
|
Re: 375 Key Hub
Are you trying to right click and Save As? Then drag and drop into your program.
|
|
#4
28-01-2014, 00:50
|
|||
|
|||
|
Re: 375 Key Hub
Quote:
|
|
#5
28-01-2014, 00:52
|
||||
|
||||
|
Re: 375 Key Hub
I have thanks, just wanted to see if anyone happened to have the file laying around so I didn't have to wait until tomorrow.
|
|
#6
28-01-2014, 01:31
|
||||
|
||||
|
Re: 375 Key Hub
Aloha!
From the looks of it, you are trying to down load the step file for the (AM-134a) 375 Key Hub.. I agree the links are both broken.. Have you tried the (AM-0134) Key Hub? http://www.andymark.com/product-p/am-0134.htm The CAD file works fine and the general specs listed are the same. Though it does not show the height.. Could work in a pinch.. just extrude a bit if needed...  Good Luck! |
|
#8
28-01-2014, 15:10
|
|||
|
|||
|
Re: 375 Key Hub
Given it is a fairly simple part I tried to download the PDF file and model the part. Unfortunately there is an issue with that file as well.
I did find a PDF this one, but it does not appear to be the 134a version. http://www.robotshop.com/andymark-375-key-hub.html |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
