Quote:
Originally Posted by Alan Anderson
That sounds almost like the code to control the cylinder is only running when the compressor is not. Can you show us the relevant parts of your program?
|
No, even if the compressor is running, we can still control extend and retract functions, but within some specific range.
http://imgur.com/yWLShcp
http://imgur.com/JcrDTcO&yWLShcp&NfAFJ3K&O8KQNNz#0 (green wires come from two different buttons)
These are the codes releated to our solenoids in our begin and teleop vi. To try in a different way, we first ran the compressor and filled the air tanks and then wired a solenoid and run the program. It still does the same thing. Although the pressure switch or compressor aren't wired, we can't extend the pistons below nearly 100 psi. Is it normal?
Q&A is certainly a good route to take, but depending on how gray the topic in question is, CD is certainly a good place to ask the question. - slijin [more] 
29-01-2014, 14:56
Threaded Mode