CRIO Rebooting woes

[DangitDrBob]

Hello, Team 4135 Beyer Robotics Representative here.

Our cRio is having issues currently. Our team is using WindRiver. We try to bring the cRio up to date with the most current image, v52. When we try to re-image it, the cRio gets stuck on the rebooting phase. We have searched the forums for solutions and have found nothing that works. We have tried:

-Setting the IP and subnet for the computer to: 10.41.35.5 and 255.255.255.0 respectively
-Turning the firewall off
-Running in safe mode, and reformatting
-Running not in safe mode
-Using a switch, then an ethernet cable directly to cRio
-Using a cross-over cable directly to cRio
-Using an ethernet cable directly to cRio
-Using the provided dlink wirelessly and wired
-Using the IP Reset, but it would not activate
-Reinstalling Windriver, Driver Station, and the imaging tool
-Using at least 4 different computers on various OS(XP,7,8) attempting all the methods above
-Test using last year's cRio and robot(Success)
-Repeatedly hit our heads against concrete pillars

Any suggestions would be greatly appreciated. We are at a loss. The only options we have left are switching cRios with last year's robot, buying another cRio, using Labview possibly, or blaming the wirers.

-Thanks
Fred C. Beyer Robotics Team 4135