|
|
|
 Yes, machining a dog profile into a steel sprocket on a manual mill was an experience filled with pain and regret. - Joe G. [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Yes, machining a dog profile into a steel sprocket on a manual mill was an experience filled with pain and regret. - Joe G. [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#4
30-01-2014, 11:14
|
||||
|
||||
|
Re: Mecanum Wheels
Tyler,
Please read the usage section on the AndyMark page you linked. Are you using chain to drive the wheels? If so, spacers and a sprocket. Live axle from a gearbox? Then you will need the corresponding hub for your axle. AndyMark, Vex Pro, and others should carry the parts you need. Do you have more detailed info about your drivetrain that you could provide so we can better help? |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode