|
|
|
 I'm in it for the challenge, winning is just a side effect... - davidthefat [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| I'm in it for the challenge, winning is just a side effect... - davidthefat [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
pic: 3D printed 8-Slot cRio Digital Sidecar table
|
|
#2
30-01-2014, 13:43
|
|||||
|
|||||
|
Re: pic: 3D printed 8-Slot cRio Digital Sidecar table
Are you still able to fit the solinoid module in with this? I looks like you can...
Very, very cool. 
|
|
#3
30-01-2014, 14:35
|
||||
|
||||
|
Re: pic: 3D printed 8-Slot cRio Digital Sidecar table
No, it only allows for two cards. We use the card guides inside to help secure the table in. You coudl probably move the legs in to allow for a 3rd card. We just posted the .step file so you can easily edit the table to use your own numbers.
Note: The holes are not perfect from table to digital sidecar, but this was done so that the leg would fit against the empty slots, making a tight fit. Use zip ties to connect the DS to table for best results. Here's the link to .step and .stl files. http://www.thingiverse.com/thing:237694/
|
|
#4
30-01-2014, 21:59
|
|||
|
|||
|
Re: pic: 3D printed 8-Slot cRio Digital Sidecar table
Nice! just downloaded your CAD off of thingeverse and am making some edits, quick question when you printed it what machine did you use and did you raft it ?
|
|
#5
31-01-2014, 07:16
|
||||
|
||||
|
Re: pic: 3D printed 8-Slot cRio Digital Sidecar table
We printed this with our Makerbot Replicator 2. We printed right to the table, no raft, structure, etc.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
