|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
FRC cRIO imaging errors
We connected the cRIO to the pc, and opened the imaging tool. The Imaging tool, however would not recognize the modules that were plugged into the cRIO. We proceeded to run the imaging tool with the java image for this year, and got this error:
Code:
Error 15426 occurred at FTP |
|
#2
|
||||
|
||||
|
Re: FRC cRIO imaging errors
Is your firewall on? Start by turning that off. Make sure you are wired to eliminate and wireless issues. Make sure your ethernet cables are good.
If it's a cRIO you've used before, it should have the IP still. Try pinging it. See if you have comms. |
|
#3
|
|||||
|
|||||
|
Re: FRC cRIO imaging errors
http://digital.ni.com/public.nsf/all...256EEA00062591 might be relevant. It suggests that you might have both a wired and wireless connection active at the same time.
|
|
#4
|
||||
|
||||
|
Re: FRC cRIO imaging errors
Thanks for the responses, i will check my wireless settings tonight. I know i had previously been connecting wirelessly. This is a new cRIO, but we could connect to the it and the imaging tool was seeing the cRIO
|
|
#5
|
||||
|
||||
|
Re: FRC cRIO imaging errors
The Imaging tool is connecting to the crio, and can see the crio as well as the image on it. The imaging tool does not, however, see the modules plugged into the cRIO
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|