|
Re: Jaguar Questions
There is no out-of-box initialization that must be done for a PWM-controlled Jaguar. There is configuration for using them with CAN.
Back to the beginning now though, are you saying when you wire it to the PDB that the LED on the Jag does not light up at all? check your PDB (just for my sanity) make sure there is no red LED light showing on the PDB saying that either A) your breaker is tripped, or B) there is no fuse installed on the PDB power ports you plugged your Jag into.
If the above don't solve your problem you are the proud owner of a broken Jaguar motor controller and you should contact VEX customer support.
__________________
John Fogarty
2010 FTC World Championship Winner & 2013-2014 FRC Orlando Regional Winner
Mentor FRC Team 1102 M'Aiken Magic
"Head Bot Coach" FTC Team 11444 Garnet Squadron
Former Student & Mentor FLL 1102, FTC 1102 & FTC 3864, FRC 1772, FRC 5632
2013 FTC World Championship Guest Speaker |
The teams that do the right thing for the sake of doing the right thing, and for believing in the message of FIRST deserve to be recognized. - Madison [more] 
Hybrid Mode
