Jaguar Questions

[Joe Ross]

Originally Posted by Cyborg Mustang

it does not light up nor give a non-zero voltage reading on the output to the motors.

No LED at all? Have you measured the input voltage?

-First, is there some kind of thing that must be done to somehow initialize a jaguar that we just failed to do, as in some special method of using it on the first time we run it?

No

-Second, do any of you know what Vex's return policy is? We've been looking around but we've had some problems finding it.

See http://www.vexrobotics.com/policies

[Cyborg Mustang]

Originally Posted by JohnFogarty

Back to the beginning now though, are you saying when you wire it to the PDB that the LED on the Jag does not light up at all? check your PDB (just for my sanity) make sure there is no red LED light showing on the PDB saying that either A) your breaker is tripped, or B) there is no fuse installed on the PDB power ports you plugged your Jag into.

Yes, that was the first thing we checked. Furthermore, the voltage is indeed arriving at the jaguar, according to the multimeter readings. We think it is indeed broken: we never had to do anything to initialize a jaguar before, but we thought it was worth checking.

Originally Posted by Joe Ross

See http://www.vexrobotics.com/policies

Thank you, that was helpful. Not sure why that did not show up on our google search.

[Ether]

Originally Posted by Cyborg Mustang

Thank you, that was helpful. Not sure why that did not show up on our google search.

What did you find out?