|
Re: pic: Bad Anderson Connector
Quote:
Originally Posted by dtengineering
So long as all your connectors are that way you'll be fine...
Right?
Jason
|
Right, but *most* teams assume that the connectors are always the right way before attaching them, which can in cases like this cause extremely costly consequences. Also, I am pretty sure that this would be considered a violation of [R49]:
Quote:
|
Originally Posted by FRC Game Manual
All non-SIGNAL LEVEL wiring with a constant polarity (i.e., except for outputs of relay modules, motor controllers, or sensor outputs) shall be color-coded as follows:
A. Red, white, brown, or black-with-stripe on the +24VDC, +12VDC, and +5VDC connections
B. Black or blue for the common or negative side (-) of the connections.
|
__________________
2010: FRC 3043, Build Assistant
2011: FRC 3043, Head of Minibot subteam; FLL 12762, Team Captain
2012: FRC 3043, Electrical; FLL 12762, Team Captain; FTC 5670, Team Captain
2013: FRC 4301, Electrical, Team Co-Captain
2014: FRC 4301, Electrical/Programming, Team Co-Captain
2015: FRC 4301, Electrical/Programming, Team Captain
2016: FRC 4301, Chief Technical Officer; FTC 10860, 10861, and 11004: Mentor. Winner, Hub City Regional (3310 & 4063)
|
I'm not sure I like this: corn dogs, cheesecake and lard. - Tom Ore [more] 
01-02-2014, 22:48
Threaded Mode