Things you only do ONCE!

[magnets]

Originally Posted by yash101

I solder without safety goggles. I also drill while holding things in my hand (carefully). You just need to make sure the your hand isn't in the path of the dill. I also carry batteries with one hand and never drop them (even though I'm a weak Indian).
^^^^BUT DON'Y TRY THIS YOURSELF CAUSE I'M NOT RESPONSIBLE IF YOU LOSE A HAND OR TWO!!!^^^^

You really need to be more safe.

1.) I'm sorry, but you have to be stupid to solder without safety goggles. My good friend was soldering, and to save time, he didn't put his safety glasses on over his eyes. An impurity in the piece he was working on came to a boil, and splashed right into his eyeball. He is now blind in that eye. Before you go to solder, think to yourself, "is my eyesight worth the inconvenience of wearing safety glasses?"

2.) If you're drilling through foam or plywood, then it's ok. If you're drilling through aluminum, and the bit catches on the part, it'll spin and cut you. If you're unlucky, it'll break your wrist. I've seen it happen.