Monnier Regulator

[Gregor]

Your link is invalid, but R82 should be what you're looking for, specifically the blue box.

R82
“Working” air pressure on the ROBOT must be no greater than 60 psi and must be provided through one primary adjustable, relieving, pressure regulator.

Norgren regulator P/N: R07-100-RNEA recommended.

As long as it regulates 60psi it should be fine.

[Tristan Lall]

They cleared this up in 2013; the Monnier in the KOP is an accepable primary regulator. For many years (until 2012) FIRST used to require a Norgren first before any other regulators, even though the Monnier was adequate alone and equivalently safe.

[popnbrown]

Sorry about the link, it had a parenthesis on the end that I accidentally included in the url. It's just a regulator and it regulates up-to 300 psi so it should be able to regulate 60psi.

The Monnier didn't come in the KOP but I assume it's the same one in FIRST Choice now. I think I'm pretty comfortable with using it now.

[Tristan Lall]

Originally Posted by popnbrown

The Monnier didn't come in the KOP but I assume it's the same one in FIRST Choice now.

I forgot it wasn't in the current KOP. Monnier 101-3002-1 is the same one that used to be provided.