|
|
|
 However, I am a firm believer in the theory that if you are pushing with a mecanum wheeled robot you are doing it wrong. - Andrew Schreiber [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| However, I am a firm believer in the theory that if you are pushing with a mecanum wheeled robot you are doing it wrong. - Andrew Schreiber [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
Re: Button to control motor?
It sounds like you just want to use a Select (on the Programming->Comparisons palette).
Here's an example using a couple of Selects to set motor speeds. This particular example maintains the last speed chosen by button until overridden by a new button press and it's compatible with the Motor Safety Config if you want to use that:  Using Case statements looks like this (replace the Solenoid Sets with Motor Sets). This method isn't compatible with the Motor Safety Config:  Last edited by Mark McLeod : 03-02-2014 at 16:45. 
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
