|
|
|
 I've found that being outraged on behalf of others is often a misuse of energy. - Taylor [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| I've found that being outraged on behalf of others is often a misuse of energy. - Taylor [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
04-02-2014, 11:54
|
||||
|
||||
|
Re: Pneumatic Wiring
I haven't used them myself, but my best guess is DC+ and DC- are the two sides of the solenoid, and the yellow/green wire is an "earth" ground. If that's the case, then you would connect DC+ to the positive side of the solenoid breakout, DC- to the negative side, and just tape up the yellow/green wire since it wouldn't be used on a robot.
Just FYI, the 5212 solenoid valve isn't legal (due to the 1/4" NPT ports). Sure you don't have the 5211? |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode