|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Camera NOT Showing up in the FRC Dashboard
I set up my Axis IP camera - plugged it into my radio - and turned it on - the video feed shows up in Smart-Dashboard but not in the FRC/LABVIEW Dashboard. What do I do?
THANKS! |
|
#2
|
|||
|
|||
|
Re: Camera NOT Showing up in the FRC Dashboard
Is the DS running and connected to the cRIO?
Did you enable the video feed in the LabVIEW dashboard using the small green control near the bottom right of the gray video feed panel: http://wpilib.screenstepslive.com/s/...view-dashboard |
|
#3
|
||||
|
||||
|
Re: Camera NOT Showing up in the FRC Dashboard
Have you used the tool from FIRST to configure the camera to the correct settings?
The guide is here: http://wpilib.screenstepslive.com/s/...an-axis-camera |
|
#4
|
||||
|
||||
|
Re: Camera NOT Showing up in the FRC Dashboard
I did configure it for FRC settings but have done nothing with the button - I will try that tomorrow and post the results.
THANKS! |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|