Xbox 360 controls will this work ?

[Mark McLeod]

Originally Posted by gerry

what im trying to do is make like a "condition" per say. if button 5 is pressed relay 1 will move forward however if button 2 and button 5 are pressed relay 1 will move reverse

Just replace your button 5 with my button 2.
and your button 2 with my button 3, and you get exactly what you stated above.

if button 5 2 is pressed relay 1 will move forward however if button 2 3 and button 5 2 are pressed relay 1 will move reverse

[gerry]

Originally Posted by Mark McLeod

Just replace your button 5 with my button 2.
and your button 2 with my button 3, and you get exactly what you stated above.

if button 5 2 is pressed relay 1 will move forward however if button 2 3 and button 5 2 are pressed relay 1 will move reverse

alright now if i wanted two bring in another button to that same circumstance say button 6 then i would have if button 5 is pressed relay 1 will move reverse if button 5 and 2 is pressed then relay 1 will move forward now if button 6 is pressed relay 2 will move reverse and if button 2 and button 6 is pressed the relay 2 will move forward
using the same logic for circumstance 1 how will i wire the two outcomes of both circumstances two only one wiring point would io use a (and) function ?

[Mark McLeod]

Just have two separate decision trees for the two different relays.
Don't try to combine them if they don't have to be. That just makes the code confusing to understand.

[gerry]

yes yes it does thanks for the help