4607 winch teaser

[Ginger Power]

C.I.S. 4607 First teaser of the year! We did everything on site in our schools welding shop. The ratchet mechanism was plasma cut out of 1/4" mild steel (most difficult part). Our hope is to get it redone in tool steel. We are going to replace all the washers with a single bushing. We also plan on welding the spool which is a little off in this picture. Let me know what you think.

[RamZ]

The pictures aren't loading...

[Ginger Power]

Originally Posted by RamZ

The pictures aren't loading...

Sorry about that I fixed it.

[Chief Hedgehog]

I didn't think that it could look anymore crude - and then you posted these pics. Looks like the fabrication crew has a few more 'bugs' to work out. At least we know that it does it's job...

[Chief Hedgehog]

By the way, is that bearing on the Toughbox backwards?

[orangemoore]

Originally Posted by Chief Hedgehog

By the way, is that bearing on the Toughbox backwards?

From my understanding the flange should be on the inside of the plate. Its a little hard to tell if that's the current setup.

[Ginger Power]

Originally Posted by Chief Hedgehog

By the way, is that bearing on the Toughbox backwards?

It's on the correct way. I remember taking it apart and putting it back together twice

[Ginger Power]

Originally Posted by Chief Hedgehog

I didn't think that it could look anymore crude - and then you posted these pics. Looks like the fabrication crew has a few more 'bugs' to work out. At least we know that it does it's job...

It looks better if you don't look at it too closely. . . Maybe I should have posted a smaller picture

[Chief Hedgehog]

Originally Posted by Ginger Power

It's on the correct way. I remember taking it apart and putting it back together twice

Is that your math, or did you get it checked? Tell the lads that they are doing well - I loved watching that thing roll tonight... click, click, click.

[orangemoore]

The only thing that really matters if it works. If it does great. If it looks good as well even better.

[Ginger Power]

Originally Posted by Chief Hedgehog

Is that your math, or did you get it checked? Tell the lads that they are doing well

I've never heard the word "lads" used on CD before . . . and yes the "math" is 100% accurate as evidenced by the picture!

[cadandcookies]

Just a small thing-- it looks like your gears are only partially lined up. This isn't good for the gear, especially in high torque situations like a winch. You may want to make sure those line up or you could be in for a nasty surprise with a stripped gear.

Overall, looks like a very good use of resources. I can't wait to see you guys' robot!

[Chief Hedgehog]

Originally Posted by cadandcookies

Just a small thing-- it looks like your gears are only partially lined up. This isn't good for the gear, especially in high torque situations like a winch. You may want to make sure those line up or you could be in for a nasty surprise with a stripped gear.

Overall, looks like a very good use of resources. I can't wait to see you guys' robot!

Ahhh... you are onto something Hopefully we see our Blue Twilight friends soon!