is 18 gage steel, used as a bracket on the chassis counted as an outward protrusion??

I did everything in high school... but only FIRST allowed me to be me. - treffk [more]

		Chief Delphi > Technical > Technical Discussion
is 18 gage steel, used as a bracket on the chassis counted as an outward protrusion??

Thread Tools

Rate Thread

Display Modes

07-02-2014, 15:02

SeafordVikingR SeafordVikingR is offline

Registered User

FRC #4567

Join Date: Feb 2014

Location: Seaford

Posts: 8

SeafordVikingR is an unknown quantity at this point

Re: is 18 gage steel, used as a bracket on the chassis counted as an outward protrusi

We are making a bracket out of sheet metal in order to mount a piston over the wheels. The bracket will go from the inner brace on the chassis to the outer brace. Are we allowed to mount the sheet metal brace on the outside of the chassis? It will be protruding from the chassis about 1/16th of an inch. Thanks in advance!

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 17:12.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.