Go to Post "You are the lead programmer now, therefore everything that goes wrong is your fault. When anything good happens its the teams fault." "But what if the robot spontaneously combusts?" "Your Fault." ~Borna - CodeTBone [more]
Home
Go Back   Chief Delphi > Technical > Pneumatics
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Spotlight this post!  
Unread 07-02-2014, 17:38
ybansal17's Avatar
ybansal17 ybansal17 is offline
Registered User
FRC #1967 (Janksters)
Team Role: Leadership
 
Join Date: Oct 2013
Rookie Year: 2014
Location: Notre Dame High School
Posts: 10
ybansal17 is an unknown quantity at this point
Question How to Use a Manifold

This year, we've decided to use a manifold for the first time, but we don't know how we're supposed to plug in the tubing.
There are three slotss on each side to put in the pneumatics tubing. One of our mentors suggested something about putting in just one tube in one of the slots and using plugs to block out the other holes, but we aren't entirely sure. Do we just plug pneumatics tubing into the middle hole? Or do we need tubes for all three holes? Would putting in one tube in the middle transfer the air to all four solenoids attached to the manifold?
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 05:24.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi