|
|
|
 Your robot weight goes up after you release the balloons. Re-inspection! - GaryVoshol [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| Your robot weight goes up after you release the balloons. Re-inspection! - GaryVoshol [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Bumper attatchment points
In the rules it does not specify a finite amount of attachment points are needed on the bumpers. Also it does not specify the amount of space that is allowed between the bumpers attachment points. Are there rules for these?
|
|
#2
08-02-2014, 16:52
|
||||
|
||||
|
Re: Bumper attatchment points
|
|
#3
08-02-2014, 21:29
|
||||
|
||||
|
Re: Bumper attatchment points
R21 F) Says your attachment system needs to be Rigid, tight, robust. How you get there is up to you. Your robot inspector will decide if you succeeded. We have always use 2 attachment per bumper segment. Generally mid way from the ends & the middle. Never has been an issue.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
