First Programming - Victor/PWM help

[Alan Anderson]

Originally Posted by popnbrown

Lights were lit with the ribbon cable in, does taking it out have any effect on these three lights? Shouldn't it only have an effect on the RSL light?

If the Digital Sidecar is properly connected to power, then having the ribbon cable removed should not affect its power LEDs. That's why disconnecting the cable is a good diagnostic for DS power issues.

If the big orange Robot Signal Light is blinking, it usually means battery voltage is getting to the Digital Sidecar okay.

[popnbrown]

Originally Posted by Alan Anderson

If the Digital Sidecar is properly connected to power, then having the ribbon cable removed should not affect its power LEDs. That's why disconnecting the cable is a good diagnostic for DS power issues.

If the big orange Robot Signal Light is blinking, it usually means battery voltage is getting to the Digital Sidecar okay.

I'll try to remove it anyways just to double check but the RSL is working as it should for disabled and teleop.