|
|
|
 If it's the loss of American lives that concerns the nation, why not campaign aggressively against smoking, or improve automobile safety? At least then, the benefits will be tangible, and substantially more significant to the well being of the locals. - Tristan Lall [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#8
10-02-2014, 14:11
|
|||||
|
|||||
|
Re: Autonomous & Teleop Switch Issues
So, you are selecting Autonomous on the Driver Station, then Enabling the robot?
If you've made a lot of changes then it might be best to debug the problem by creating a new robot project and copy/paste your Auto code into Autonomous Independent. One of the simple tests you can do is to simply make some of the status lights blink in Autonomous, like this:  Let's look at Your current Robot Main first. Does it now look like this: Last edited by Mark McLeod : 10-02-2014 at 14:14. 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode