Clippard Reservoir Mount

[Qbot2640]

Originally Posted by team3245

... or if some team might have an stl of a drawing that they use for mounting these cylinders. Our team does have access to a 3D printer!

http://www.thingiverse.com/thing:246704

Try this one...let me know if it needs any adjustments.

[Wren Hensgen]

Team 225 has used both metal and plastic "plumber's tape", which is simply a thin strip of material with holes in it that can be bent around the tanks, and bolted down.

[TheKeeg]

Originally Posted by Wren Hensgen

Team 225 has used both metal and plastic "plumber's tape", which is simply a thin strip of material with holes in it that can be bent around the tanks, and bolted down.

We have used this in the past and it works well. Honestly though, zip ties are much easier and more workable. If you are worried about them breaking than you need to start buying better zipties

[M. Mellott]

I sent you a PM. Send me your email and I'll forward you a STEP of our mounting bracket that we also 3D printed...works really well.