On-Robot Controls

[kevin.li.rit]

Originally Posted by MrBasse

I think R30 blue box would make that a issue..

4.7.2 R30
The integral mechanical and electrical system of any motor may not be modified. Motors, servos, and electric solenoids
used on the ROBOT shall not be modified in any way, except as follows:
A. The mounting brackets and/or output shaft/interface may be modified to facilitate the physical connection of the
motor to the ROBOT and actuated part.
B. The electrical input leads may be trimmed to length as necessary.
C. The locking pins on the window motors (P/N: 262100-3030 and 262100-3040) may be removed.