|
|
|
 but yea. people have this perception of robots as like, the terminator.
you don't have to be a super genius to do this stuff. - christina_omg [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| but yea. people have this perception of robots as like, the terminator.
you don't have to be a super genius to do this stuff. - christina_omg [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
16-02-2014, 09:17
|
|||
|
|||
|
Re: 8 Slot cRIO deployment issues
Does the cRIO reboot? That is unfortunately, not an error I've seen during deployment.
I suppose you could go to Tools>>Options and to the VI server tab and ensure that TCP option is enabled. You can also do that on the Target Properties in the project. That is what it is complaining about, but I'm not sure why. Please let me know if that changes anything. You may also want to see if you can ignore the error, as it seems that the deployment succeeded, but perhaps was unable to access the controller afterwards for some cleanup step. Greg McKaskle 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode