Router Issue? (Watchdog not Feed)

[magnets]

Originally Posted by simpsonboy77

This is just wrong. No answer is better than a wrong answer. The watchdog has nothing to do with network communication.

The watchdog will stop all outputs from the cRio when the watchdog is not fed. You put feed statements in your program to inform the cRio that your user code is still running and isn't hung up in a loop. Either the set expiration was set too low, or you have a slow loop somewhere. Set expiration is basically setting the amount of maximum amount of time you want to allow between 2 feeds without disabling the robot.

What you've posted is "just wrong". No answer is better than a wrong answer.

There is a network watchdog present on the cRIO. The system watchdog has everything to do with network communication.

https://decibel.ni.com/content/docs/DOC-2957