|
|
|
 we were sick and tired of compromises: "speed or torque", "traction or maneuverability", etc.; bump that, we want it all. all we had to compromise was simplicity. - RogerR [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
17-02-2014, 07:15
|
||||
|
||||
|
Re: URGENT- VEX 2 CIM Ballshifter will not disengage
a while back, I uploaded CAD files for a dual pancake mod for exactly this purpose.
here is the link for the coupling, but you have to take apart the shell and drill new holes for the standoffs, I can also upload the CAD files for the custom mounting plate. This mod is assuming you have access to a 3D printer. What this does, is essentially put a 1.5" bore cylinder on the shifting mechanism. hope this helps https://www.dropbox.com/s/4mveor2l36...oupling.SLDPRT 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode