Light?

[NickRobischeau9]

YES THE ORANGE BLINKING LIGHT

[notmattlythgoe]

R63 
ROBOTS must use at least one (1) diagnostic ROBOT Signal Light (RSL) (P/N: 855PB-B12ME522).

Any RSL must be:

mounted on the ROBOT such that it is easily visible while standing three (3) ft in front of the ROBOT,
connected to the “RSL” supply terminals on a Digital Sidecar that is connected to an NI 9403 module in Slot 2 of the cRIO, 
and wired for solid light operation, by placing a jumper between the “La” and “Lb” terminals on the light per Figure 4-13.

[RamZ]

Originally Posted by NickRobischeau9

YES THE ORANGE BLINKING LIGHT

What do you want to know about it?
Please explain all that you want to know, or it'll be hard for us to help you.

[NickRobischeau9]

THe location of the Light like how high and where

[notmattlythgoe]

Originally Posted by NickRobischeau9

THe location of the Light like how high and wear

As long as it is visible by someone standing 3 feet in front of the robot it doesn't matter where.

[Whippet]

Originally Posted by R63

ROBOTS must use at least one (1) diagnostic ROBOT Signal Light (RSL) (P/N: 855PB-B12ME522).

Any RSL must be:

• mounted on the ROBOT such that it is easily visible while standing three (3) ft in front of the ROBOT,
• connected to the “RSL” supply terminals on a Digital Sidecar that is connected to an NI 9403 module in Slot 2 of the cRIO, and
• wired for solid light operation, by placing a jumper between the “La” and “Lb” terminals on the light per Figure 4-13.

See the 2014 ROBOT Data Diagram on the KOP website and the item bulletin for connection details.

(Emphasis mine)

EDIT: Beat to it again.

[NickRobischeau9]

Thanks For the Help

[Whippet]

Originally Posted by R63

ROBOTS must use at least one (1) diagnostic ROBOT Signal Light (RSL) (P/N: 855PB-B12ME522).

Any RSL must be:

• mounted on the ROBOT such that it is easily visible while standing three (3) ft in front of the ROBOT,
• connected to the “RSL” supply terminals on a Digital Sidecar that is connected to an NI 9403 module in Slot 2 of the cRIO, and
• wired for solid light operation, by placing a jumper between the “La” and “Lb” terminals on the light per Figure 4-13.

See the 2014 ROBOT Data Diagram on the KOP website and the item bulletin for connection details.

These are the rules.

EDIT: Bah, notmattlythgoe beat me to the punch...