Light?

[NickRobischeau9]

THe location of the Light like how high and where

[notmattlythgoe]

Originally Posted by NickRobischeau9

THe location of the Light like how high and wear

As long as it is visible by someone standing 3 feet in front of the robot it doesn't matter where.

[Whippet]

Originally Posted by R63

ROBOTS must use at least one (1) diagnostic ROBOT Signal Light (RSL) (P/N: 855PB-B12ME522).

Any RSL must be:

• mounted on the ROBOT such that it is easily visible while standing three (3) ft in front of the ROBOT,
• connected to the “RSL” supply terminals on a Digital Sidecar that is connected to an NI 9403 module in Slot 2 of the cRIO, and
• wired for solid light operation, by placing a jumper between the “La” and “Lb” terminals on the light per Figure 4-13.

See the 2014 ROBOT Data Diagram on the KOP website and the item bulletin for connection details.

(Emphasis mine)

EDIT: Beat to it again.

[NickRobischeau9]

Thanks For the Help