|
|
|
 GP isn't just a good idea, it's mathematically optimal. - Jared Russell [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| GP isn't just a good idea, it's mathematically optimal. - Jared Russell [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
HELP: 2 Motors 1 Button in LabVIEW
Hi
We are trying to program 2 motors to run in only one direction when a single button is pushed. We have tried a couple of different things with the code but nothing seems to be working. We get no response from either motor. I have attached pictures of the code we tried. When using buttons 2,3,4, & 5 to run the motors in forward and reverse separately, everything works fine. Any help would be greatly appreciated. We used the method outlined by Team 358 here:  
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode