|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Team 1610 Presents "Frank"
This is our first ever reveal video with last-minute footage. We'll try to do better next year.
http://www.youtube.com/watch?v=EHRePbZFgyg Featuring: "All-Vex-Everything" Chassis/Drivetrain - This turned out great for us as a small town team with few resources and no engineers.
Pneumatic "gate latch" lock and release mechanism for catapult Ball pickup similar to Ri3D running Banebots wheels on a belt driven 0.5" hex shaft Note: Robot name has nothing to do with the current FRC Director, purely coincidence. |
|
#2
|
|||||
|
|||||
|
Re: Team 1610 Presents "Frank"
Looking great guys. We're looking forward to coming down for some practice and playing this year's game at both VA and Chesapeake with you guys. See you soon.
|
|
#3
|
|||||
|
|||||
|
Re: Team 1610 Presents "Frank"
I'm really liking the name of this robot!
![]() Last edited by bEdhEd : 26-02-2014 at 15:22. |
|
#4
|
||||
|
||||
|
Re: Team 1610 Presents "Frank"
Good looking robot guys. I'm loving it
![]() |
|
#5
|
|||||
|
|||||
|
Re: Team 1610 Presents "Frank"
I'm always a fan of a compact machine, but the ball really likes to bounce around once you've rolled it in. You'll have to be careful of defenders trying to spoil your shots
![]() |
|
#6
|
|||||
|
|||||
|
Re: Team 1610 Presents "Frank"
I agree. That's why my team's bot has side panels on our intake. Without them, a hit from another bot or a sudden turn can cause us to lose control of the ball. Plus, we needed a place to put our sponsors!
|
|
#7
|
||||
|
||||
|
Re: Team 1610 Presents "Frank"
We noticed that (first two shots in the video) and the drivers began holding down the ball with the ball pickup while driving and getting into position (last few shots of the video). Shouldn't be too much of a problem.
|
|
#8
|
|||||
|
|||||
|
Re: Team 1610 Presents "Frank"
Good to know you've got it under control. Our robot has a similar issue for sponsor placement, we just need our side panels and sponsor labels.
|
|
#9
|
||||
|
||||
|
Re: Team 1610 Presents "Frank"
Looks good, can't wait to see it at VCU.
|
|
#10
|
||||
|
||||
|
Re: Team 1610 Presents "Frank"
Hello...
There are side panels on it, but they are a little hard to see in the video. The one Go Pro shot where you see it roll around the most the driver had made a hard stop near the 18 foot line. Like Kyle said they had also learned to trap the ball using the pick up arm. (two of the Go Pro shots show the arm coming down on the ball to help hold it). We're working on a practice robot so they can get even better at driving and shooting. Keep in mind this was shot on Bag and Tag day and mainly because of snow days and waiting for parts we lost at least 7 days. They only had about four hours to practice on and off (and also keep in mind our veteran drivers graduated last year) So they didn't do too bad. We'll see what they can do after the practice bot is done and at VCU. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|