|
|
|
 We're 3 pounds over. Drill until the hole saw is too hot to touch, then go find something else to cut off while you wait for it to cool down. - Richard Wallace [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| We're 3 pounds over. Drill until the hole saw is too hot to touch, then go find something else to cut off while you wait for it to cool down. - Richard Wallace [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#8
02-03-2014, 14:37
|
||||
|
||||
|
Re: Watch Dog Not Fed...
Most likely positioning of router.
Also, make sure your router is powered by the transformer plugged into the 12V port on the bottom of the PD board. Most teams don't know this, but that port on the bottom of the PD board will provide a constant supply of 12V until the battery is around 4V or lower. 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode