Acquiring 120 tooth 9mm HTD belts

[RohitD]

I believe SDP-SI would have what you're looking for.

Be warned though - the VEXPro/WCP 9mm HTD belts are actually 8.5mm wide so that two of them can fit on a 15mm wide pulley (that's in reality 17mm wide). Two SDP-SI 9mm pulleys will be 18mm wide and may not fit on a VEXPro/WCP 15mm wide pulley.

[nick1023]

Did you find a suitable replacement for the vexpro belt? The replacements I ordered from B&B manufacturing are 8.9mm too big to fit 2 on a vexpro sprocket. From the calls I've made to Gates distributors and others I havent found a replacement that will be closer to 8.5 mm than 9mm

[Chris Fultz]

Try stock drive. They carry several 9mm

[nick1023]

Stock Drive sold out of 9mm 120 T as well as 6mm 120T. I could have 8.5 specially made but with a lead time of two weeks.

[Chris Fultz]

Can you use something slightly longer and then use a tensioner?