|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
|
|||
|
|||
|
Re: Acquiring 120 tooth 9mm HTD belts
Be warned though - the VEXPro/WCP 9mm HTD belts are actually 8.5mm wide so that two of them can fit on a 15mm wide pulley (that's in reality 17mm wide). Two SDP-SI 9mm pulleys will be 18mm wide and may not fit on a VEXPro/WCP 15mm wide pulley.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|