Were to store practice bot at regional?

[Chris is me]

Originally Posted by notmattlythgoe

Like I said before, I don't think this falls under the "static" definition. While at the competition, your 45 lb witholding allowance is now changing dynamically each time you bring in a new part. With that said, my word is in no way official, and I would ask the inspector at the competition if what you are doing falls under the rules.

The set is static, you just don't define the set at unbag time. Ie if 45 pounds got me 4 assemblies, once we bring these in we cannot exchange them for other parts wherever we get them.

[notmattlythgoe]

Originally Posted by Chris is me

The set is static, you just don't define the set at unbag time. Ie if 45 pounds got me 4 assemblies, once we bring these in we cannot exchange them for other parts wherever we get them.

static set of FABRICATED ITEMS that shall not exceed 45 lbs

That set exceeds 45 lbs though and by your description would be illegal. And by not defining them at unbag time you are creating a dynamic set that can change.

[Chris is me]

Originally Posted by notmattlythgoe

That set exceeds 45 lbs though and by your description would be illegal. And by not defining them at unbag time you are creating a dynamic set that can change.

My interpretation of "static set" is that you cannot go back and say "oh, this item we didn't need doesn't count anymore, so this other item counts". As in "once it's in, it's in." Your interpretation has a lot of consequences, such as teams never being able to bring in parts they forgot on Thursday, and requiring all of the items enter the venue at the exact same time.

But for the sake of argument let's use your interpretation - you must define this set of items once and it will remain that way. What if you bring in zero pounds of items and then define the set once you go to your trailer / shop / whatever in one fell swoop?

[notmattlythgoe]

Originally Posted by Chris is me

My interpretation of "static set" is that you cannot go back and say "oh, this item we didn't need doesn't count anymore, so this other item counts". As in "once it's in, it's in." Your interpretation has a lot of consequences, such as teams never being able to bring in parts they forgot on Thursday, and requiring all of the items enter the venue at the exact same time.

But for the sake of argument let's use your interpretation - you must define this set of items once and it will remain that way. What if you bring in zero pounds of items and then define the set once you go to your trailer / shop / whatever in one fell swoop?

We have always brought in our withholding allowance when we brought in our robot, so maybe that is skewing my interpretation of the rule. I would obviously use better judgement than "Oh you forgot a part you meant to bring, sucks to be you" but I could very well be wrong in my interpretation. In my opinion you have an intended set of parts that you plan on bringing to the competition and that set of parts should not exceed the 45 lb allowance. And I want to make sure to put it out there that I am in no way calling anybody a cheater, misinterpretations happen and rules are missed every year, I don't think anybody that is doing this is doing it knowing they are doing it illegally.

[Steve W]

This rule applies to manufactured parts. There is no limit on COTS items.

[Ian Curtis]

It all just seems a little bit silly. We have a 6 week build season because FIRST "likes us", but we have to build an entire second robot to have adequate practice time, and then to actually bring spares or upgrades to an event we need to fabricate another 1/3 of our robot or disassemble and reassemble our robot after every event?

Originally Posted by JamesCH95

That's not what I'm saying. Please don't overreact until you understand what I mean.

I'm saying that you will be under the honor system that you've pre-selected your 45lbs of withholding and won't go to your shop to take advantage of resources and spare parts that other teams don't have access to.

To clarify, its okay for any team to bring their practice robot, so long as they write out a list of which parts they are declaring as part of their withholding allowance?

[JamesCH95]

Originally Posted by Ian Curtis

It all just seems a little bit silly. We have a 6 week build season because FIRST "likes us", but we have to build an entire second robot to have adequate practice time, and then to actually bring spares or upgrades to an event we need to fabricate another 1/3 of our robot or disassemble and reassemble our robot after every event?



To clarify, its okay for any team to bring their practice robot, so long as they write out a list of which parts they are declaring as part of their withholding allowance?

In my opinion that would be okay, provided that the team could prove that those parts weigh less than 45lbs.

The 45lbs of witholding allowance isn't allowing you to use up to 45lbs of any pre-fab stuff, it's that you can bring up to 45 of pre-fab stuff. So, conceivably, you have to plan that allowance out

Bringing a practice robot and stripping any <45lbs of stuff off it isn't the same as having to have brought <45lbs of stuff with you from the start. This is the core difference of interpretation that most people are having here. I think that FIRST intends for us to have pre-selected that 45lbs of stuff, but Q&A is the only way to clarify this. Again, everyone is under the honor system in this rule, especially teams based at (or near) event venues.

[Steve W]

Originally Posted by Ian Curtis

It all just seems a little bit silly. We have a 6 week build season because FIRST "likes us", but we have to build an entire second robot to have adequate practice time, and then to actually bring spares or upgrades to an event we need to fabricate another 1/3 of our robot or disassemble and reassemble our robot after every event?



To clarify, its okay for any team to bring their practice robot, so long as they write out a list of which parts they are declaring as part of their withholding allowance?

You are allowed only 1 robot at the event, period.

[wilsonmw04]

Originally Posted by Steve W

You are allowed only 1 robot at the event, period.

Please define the "event." This is the ultimate issue. I think the arena is the event not the parking lot.

[JohnBoucher]

Originally Posted by Steve W

You are allowed only 1 robot at the event, period.

Where is the like button? Listen to what Steve is saying.

[Monochron]

I think the intent of the rule is very clear. You have your robot, 45 pounds of pre-fabricated stuff, and then infinite raw materials. Drawing ANYTHING from a second robot is cheating.

Not to draw sweeping generalizations here, but teams who are trying to bend the rule to fit bringing extra parts outside the 45 pound limit are not upholding the spirit of FIRST. You are allowed to make a set amount of backup/alternate assemblies and that is it. You have to be intelligent with which assemblies you bring to competition. You can only do work to better your robot during pit hours and at the pits.

[Matt_Boehm_329]

Originally Posted by wilsonmw04

If we sent someone to our shop to make a part for our team or another team that is against the rules as well? The definition is vague and causes problems.

I was under the impression that fabrication must take place at the events, during event hours to maintain balance for teams that have a full shop 5 minutes from the event with those across a country

Originally Posted by Anupam Goli

That makes sense. In fact. it's in the rules that you have to do all fabrication in the pits or machine shop during competition, and I'm not debating that. Just the wording of the rule is:

Can we find a rule # for the above mentioned? And has anyone put this to Q&A yet?

Edit: In reference to the original question, i too defend the "static" side. having an unchanging set of prefab parts is very different than pulling up to 45lbs from a set of 120lbs of parts. I also agree with the previously mentioned idea that pulling a part off a practice bot for use on the competition bot outside the regional falls under fabricating/ modifying parts outside the event similar to what was posed by my first quote and is also against the rules

[Anupam Goli]

Originally Posted by Matt_Boehm_329

Can we find a rule # for the above mentioned? And has anyone put this to Q&A yet?

T11:

At events, Teams may only produce FABRICATED ITEMS in the pit areas or provided machine shops, as defined in the Administrative Manual, Section 4.8: The Pit.

[orangemoore]

Just to put this out there is to my understanding of the inclusion of the word "Static" was put in place so that teams cannot exchange parts they brought in first with other secondary parts later in the competition.

As for this entire discussion I find that there are a lot of opinions and the rule isn't very clear. If it hasn't been done already a question should to submitted to the Q & A for an official response.

[Matt_Boehm_329]

Originally Posted by Anupam Goli

T11:

Ahh that's what I was looking at too. Thanks.