|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
We have created our main.VI project. We came back to it today and it no longer runs the robot it just goes to simulation mode, how do I change this so that when we run the VI it does not go to FRC simulation viewer?
![]() |
|
#2
|
||||
|
||||
|
Re: Help us please!
Down in the lower left corner of your Robot Main.vi, you will see a status bar with the title of your project in it. Right click on this bar and select the one ending with "RT CompactRIO Target". Give it a minute to reload all the correct vi's and you should be good to go.
|
|
#3
|
|||
|
|||
|
Re: Help us please!
Quote:
If you were already doing this then follow what Alex posted above to get your Robot Main pointed back at the correct target. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|