Netbeans programming ONE motor on axis of Logitech Attack 3

[18mfogwell]

Originally Posted by Whippet

I'm not quite sure what you mean; could you please elaborate?

What would the number be for the y-axis? Does the number vary?

[Whippet]

Ah, ok. Every joystick axis has a number attached attached to it. The joystick.Get command basically checks a database for which axis number matches x, y, z, or the other axis names. I prefer to use getRawAxis because I know exactly the axis number I am calling for. It's really a matter of preference. If you prefer, you can use joystick.getAxis(y) to return the same value.

[18mfogwell]

Originally Posted by Whippet

Ah, ok. Every joystick axis has a number attached attached to it. The joystick.Get command basically checks a database for which axis number matches x, y, z, or the other axis names. I prefer to use getRawAxis because I know exactly the axis number I am calling for. It's really a matter of preference. If you prefer, you can use joystick.getAxis(y) to return the same value.

Is there one numbers that is always associated with x or y?

[Whippet]

Originally Posted by 18mfogwell

Is there one numbers that is always associated with x or y?

The x axis is usually 1, and the y axis is usually 2. Axis 3 is usually the throttle, unless there's a twist axis, like in the Extreme 3D Pro joystick.