Go to Post Great things don't just happen to HoF teams; HoF teams make great things happen. - Siri [more]
Home
Go Back   Chief Delphi > Technical > Pneumatics
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
Closed Thread
Thread Tools Rate Thread Display Modes
  #16   Spotlight this post!  
Unread 09-01-2014, 14:18
Domtech's Avatar
Domtech Domtech is offline
I Do Everything
AKA: Dominic
FRC #2412 (Robototes)
Team Role: Mentor
 
Join Date: Feb 2010
Rookie Year: 2004
Location: Bellevue WA
Posts: 46
Domtech is an unknown quantity at this point
Re: Pneumatic speed

Quote:
Originally Posted by CalTran View Post
...so you're saying over-pressure the pneumatic?
Not over-pressurizing it, but giving it time to reach full pressure.

For people who don't understand this: A pneumatic cylinder will normally start moving as soon as air starts to flow into it, If you lock a pneumatic cylinder in a slightly extended position and allow it to reach working psi, it will throw with a lot more force than just turning on air to it and having it extend slowly as air flows into it.
  #17   Spotlight this post!  
Unread 09-01-2014, 16:43
Racer26 Racer26 is offline
Registered User
no team
Team Role: Alumni
 
Join Date: Apr 2003
Rookie Year: 2003
Location: Beaverton, ON
Posts: 2,229
Racer26 has a reputation beyond reputeRacer26 has a reputation beyond reputeRacer26 has a reputation beyond reputeRacer26 has a reputation beyond reputeRacer26 has a reputation beyond reputeRacer26 has a reputation beyond reputeRacer26 has a reputation beyond reputeRacer26 has a reputation beyond reputeRacer26 has a reputation beyond reputeRacer26 has a reputation beyond reputeRacer26 has a reputation beyond repute
Re: Pneumatic speed

Quote:
Originally Posted by Domtech View Post
Not over-pressurizing it, but giving it time to reach full pressure.

For people who don't understand this: A pneumatic cylinder will normally start moving as soon as air starts to flow into it, If you lock a pneumatic cylinder in a slightly extended position and allow it to reach working psi, it will throw with a lot more force than just turning on air to it and having it extend slowly as air flows into it.
This is correct. The physics don't allow my 60psi working air pressure to magically become higher when valve is opened and movement of the piston is mechanically restricted. It simply allows for a more instantaneous punching action
  #18   Spotlight this post!  
Unread 09-01-2014, 20:30
Jibri Wright's Avatar
Jibri Wright Jibri Wright is offline
Registered User
FRC #1781 (Electric Eagles)
Team Role: CAD
 
Join Date: Oct 2012
Rookie Year: 2011
Location: Chicago
Posts: 179
Jibri Wright will become famous soon enough
Re: Pneumatic speed

Quote:
Originally Posted by Domtech View Post
Not over-pressurizing it, but giving it time to reach full pressure.

For people who don't understand this: A pneumatic cylinder will normally start moving as soon as air starts to flow into it, If you lock a pneumatic cylinder in a slightly extended position and allow it to reach working psi, it will throw with a lot more force than just turning on air to it and having it extend slowly as air flows into it.
Actually the piston is receiving 60psi the instant the solenoid switches. The reason it shoots slower in normal function is because the air on the other side of the cylinder has to be pushed out by the new air coming in. It takes time to do this and force. If you stall the piston's extension in the manner you're talking about then this allows for the air on the other side of the cylinder to be released. Pressure does build up on the other side, but all the air technically doesn't go into the piston. After the shaft is released does the remaining air enter the cylinder.
__________________
You know someone likes something when after doing it a million times, they still marvel at it as if it was the FIRST.

Greatness asks how can I make it better. Genius asks how can I make it different.
  #19   Spotlight this post!  
Unread 09-01-2014, 21:09
Wren Hensgen's Avatar
Wren Hensgen Wren Hensgen is offline
Alum, Mentor, Volunteer
AKA: Wren Hensgen
FTC #10353 (MetalWorks)
Team Role: Mentor
 
Join Date: Feb 2013
Rookie Year: 2009
Location: United States
Posts: 84
Wren Hensgen is a jewel in the roughWren Hensgen is a jewel in the roughWren Hensgen is a jewel in the rough
Re: Pneumatic speed

Another option that 225 has been experimenting with is using exhaust valves on the cylinders themselves. This allows the pressure to vent directly out of the cylinder, and not have to flow back through the solenoid.
  #20   Spotlight this post!  
Unread 09-01-2014, 21:50
Travis Hoffman's Avatar Unsung FIRST Hero
Travis Hoffman Travis Hoffman is offline
O-H
FRC #0048 (Delphi E.L.I.T.E.)
Team Role: Engineer
 
Join Date: Sep 2001
Rookie Year: 2001
Location: Warren, Ohio USA
Posts: 4,047
Travis Hoffman has a reputation beyond reputeTravis Hoffman has a reputation beyond reputeTravis Hoffman has a reputation beyond reputeTravis Hoffman has a reputation beyond reputeTravis Hoffman has a reputation beyond reputeTravis Hoffman has a reputation beyond reputeTravis Hoffman has a reputation beyond reputeTravis Hoffman has a reputation beyond reputeTravis Hoffman has a reputation beyond reputeTravis Hoffman has a reputation beyond reputeTravis Hoffman has a reputation beyond repute
Re: Pneumatic speed

Quote:
Originally Posted by DonRotolo View Post
To "help" the cylinder's piston extend much faster, perhaps something like a spring or latex tubing can be used to 'pull' it out...

Gee, you don't even need to supply air to it, just release it somehow to extend (under spring power) and let the air out of the other end. Then pressurize the other end to retract it and stretch the spring agai for the next shot.
Sounds like 3138's 2010 kicker, which could kick a soccer ball cross-field with ease.
__________________

Travis Hoffman, Enginerd, FRC Team 48 Delphi E.L.I.T.E.
Encouraging Learning in Technology and Engineering - www.delphielite.com
NEOFRA - Northeast Ohio FIRST Robotics Alliance - www.neofra.com
NEOFRA / Delphi E.L.I.T.E. FLL Regional Partner
  #21   Spotlight this post!  
Unread 10-01-2014, 12:50
hrench's Avatar
hrench hrench is offline
Mechanical build mentor
AKA: Bob Hrenchir
FRC #1108 (Panther Robotics)
Team Role: Mentor
 
Join Date: Jan 2012
Rookie Year: 2010
Location: Paola, KS
Posts: 220
hrench is a name known to allhrench is a name known to allhrench is a name known to allhrench is a name known to allhrench is a name known to allhrench is a name known to all
Re: Pneumatic speed

Quote:
Originally Posted by Jibri Wright View Post
Actually the piston is receiving 60psi the instant the solenoid switches. The reason it shoots slower in normal function is because the air on the other side of the cylinder has to be pushed out by the new air coming in. It takes time to do this and force. If you stall the piston's extension in the manner you're talking about then this allows for the air on the other side of the cylinder to be released. Pressure does build up on the other side, but all the air technically doesn't go into the piston. After the shaft is released does the remaining air enter the cylinder.
no, the cylinder receives only 'flow' from a 60 psi reservior. the pressure in the cylinder will only be what is required to move the piston forward until the piston becomes either obstructed or fully extended. This pressure may be as low as one psi delta.

What I'm saying is that if you just hold the piston in place for a short bit, the pressure will be able to build up. The business about the air getting out of the back side of the cylinder is so not-important. If you build-up 60 psi on one side and have effectively zero on the other side, it will move very fast. Our prototype can shoot across the room. But accuracy and repeatibility are still in question.
  #22   Spotlight this post!  
Unread 10-01-2014, 13:02
JamesCH95's Avatar
JamesCH95 JamesCH95 is offline
Hardcore Dork
AKA: JCH
FRC #0095 (The Grasshoppers)
Team Role: Engineer
 
Join Date: Dec 2004
Rookie Year: 2001
Location: Enfield, NH
Posts: 1,891
JamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond repute
Re: Pneumatic speed

Quote:
Originally Posted by hrench View Post
don't mean to give away my team's ideas, but all you need to do to get an air cylinder to move faster is resist it--latch it or hold the ball down or something--until it has more pressure in it. Then you let go.

Lots of ways to hold it down for a little while.
You're talking about building up pressure in the lines to the air cylinder, essentially. There is little volume in those lines (or, at least there shouldn't be!) and thus it won't help the cylinder deploy a whole lot faster.

The 'right' way to solve this problem IMO is to increase flow to your mechanism (better valves, shorter tube runs, multiple storage tank taps, multiple norgren regulators, multiple smaller cylinders to utilize more valves) rather than adding a whole other mechanism to restrain a cylinder.
__________________
Theory is a nice place, I'd like to go there one day, I hear everything works there.

Maturity is knowing you were an idiot, common sense is trying to not be an idiot, wisdom is knowing that you will still be an idiot.

Last edited by JamesCH95 : 10-01-2014 at 13:06.
  #23   Spotlight this post!  
Unread 10-01-2014, 13:20
s_forbes's Avatar
s_forbes s_forbes is online now
anonymous internet person
FRC #0842 (Falcon Robotics)
Team Role: Engineer
 
Join Date: Jan 2006
Rookie Year: 2006
Location: Phoenix, AZ
Posts: 1,156
s_forbes has a reputation beyond reputes_forbes has a reputation beyond reputes_forbes has a reputation beyond reputes_forbes has a reputation beyond reputes_forbes has a reputation beyond reputes_forbes has a reputation beyond reputes_forbes has a reputation beyond reputes_forbes has a reputation beyond reputes_forbes has a reputation beyond reputes_forbes has a reputation beyond reputes_forbes has a reputation beyond repute
Re: Pneumatic speed

Quote:
Originally Posted by JamesCH95 View Post
You're talking about building up pressure in the lines to the air cylinder, essentially. There is little volume in those lines (or, at least there shouldn't be!) and thus it won't help the cylinder deploy a whole lot faster.
You can actually build up pressure in the cylinder itself if it isn't contracted all of the way when you start filling. In 2008 lots of teams did this to allow the cylinders to expand faster. I posted a picture of one such catapult in this post.
  #24   Spotlight this post!  
Unread 10-01-2014, 13:25
JamesCH95's Avatar
JamesCH95 JamesCH95 is offline
Hardcore Dork
AKA: JCH
FRC #0095 (The Grasshoppers)
Team Role: Engineer
 
Join Date: Dec 2004
Rookie Year: 2001
Location: Enfield, NH
Posts: 1,891
JamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond repute
Re: Pneumatic speed

Quote:
Originally Posted by s_forbes View Post
You can actually build up pressure in the cylinder itself if it isn't contracted all of the way when you start filling. In 2008 lots of teams did this to allow the cylinders to expand faster. I posted a picture of one such catapult in this post.
Well, clearly it works, so there's not arguing against success. It still doesn't seem like a great solution to me, I would prefer to have single-step mechanism actuation for reliability reasons.

Here is a post with 95's 2008 shooter. Just lots of pistons and valves!
__________________
Theory is a nice place, I'd like to go there one day, I hear everything works there.

Maturity is knowing you were an idiot, common sense is trying to not be an idiot, wisdom is knowing that you will still be an idiot.
  #25   Spotlight this post!  
Unread 10-01-2014, 16:23
Marc S.'s Avatar
Marc S. Marc S. is offline
Read the Manual! PLEASE!
AKA: Adversity
FRC #3925 (Robotics)
Team Role: College Student
 
Join Date: Mar 2011
Rookie Year: 2010
Location: Santa Barbara, Ca
Posts: 302
Marc S. has a reputation beyond reputeMarc S. has a reputation beyond reputeMarc S. has a reputation beyond reputeMarc S. has a reputation beyond reputeMarc S. has a reputation beyond reputeMarc S. has a reputation beyond reputeMarc S. has a reputation beyond reputeMarc S. has a reputation beyond reputeMarc S. has a reputation beyond reputeMarc S. has a reputation beyond reputeMarc S. has a reputation beyond repute
Re: Pneumatic speed

The reason the cylinder is slow is because it is pushing a lot of air through the vent, the fittings, the tubing, and finally the solenoid block (the same is true for the air flowing into the cylinder). So you can increase the psi and the size of the solenoid, but this will always be the main limiting factor.

The solution is to precharge the cylinder before firing it, and only plumb it in the firing direction (leaving the vent wide open). This method requires a locking mechanism (like a gate latch) to hold the cylinder back when precharged, and something to retract the cylinder (like a smaller diameter cylinder that gets out of the way). You can even directly plumb an air tank to the cylinder to decrease the psi drop during extension.

I'm sure you could improve upon this idea, but it's at least a starting point.
__________________
Alumnus FRC 973: 2010, 2011, 2012, 2013
2011 World Championship Winning Alliance Member

FLL Mentor and Competition Judge 2012-2015
Student-Mentor FRC 5102: 2014, 2015
Student-Mentor FRC 3925: 2015, 2016

FRC Ventura Regional Planning Committee Member & Regional Field Supervisor: 2015, 2016
  #26   Spotlight this post!  
Unread 11-03-2014, 16:02
hrench's Avatar
hrench hrench is offline
Mechanical build mentor
AKA: Bob Hrenchir
FRC #1108 (Panther Robotics)
Team Role: Mentor
 
Join Date: Jan 2012
Rookie Year: 2010
Location: Paola, KS
Posts: 220
hrench is a name known to allhrench is a name known to allhrench is a name known to allhrench is a name known to allhrench is a name known to allhrench is a name known to all
Re: Pneumatic speed

Quote:
Originally Posted by Marc S. View Post
So you can increase the psi and the size of the solenoid, but this will always be the main limiting factor.

The solution is to precharge the cylinder before firing it, and only plumb it in the firing direction (leaving the vent wide open).

I'm sure you could improve upon this idea, but it's at least a starting point.
Marc S. was very close to the idea that my team 1108 used to win the Crossroads regional.

If you only retract the piston partially, you leave a reservior right in the cylinder to fill with air. Fill that to 60 psi while you hold down the catapult (we use an electromagnet) and then let go.

Also, yes, you don't want anything at all on the outputs of the cylinders. We simply use gravity to retract.

Of special note, the two robots that finished Crossroads as top seeds both ended up in the finals were both fully pneumatic.

Our 1108 has the system described above, where 1024, Kil-A-Bytes, has a circle of six very small diameter cylinders with very big valves and they shoot very well too, without a failure as far as I know.

I'd be curious to know how many other robots out there are full-pneumatic and how they've done.
Closed Thread


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 22:19.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi