|
|
|
 When is comes down to it, remember what FIRST is really about, it is about those students and helping to inspire them - E3 Robotics Ctr [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| When is comes down to it, remember what FIRST is really about, it is about those students and helping to inspire them - E3 Robotics Ctr [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Autonomous Mode - only one side operates (Labview)
We trying to get autonomous drive working and having issue with getting both sides of drive train to respond. Only one side will operate.
The drive train operates fine in teleop. We setup using in Labview as Robot Project (arcade drive). We have tested on our last years robot and had the same issue occur. We tried from several computers to build and deploy. We created a basic project and only modified the autonomous code (adding no other code) and setting both left and right to same number. The same issue occurs - only one side runs. 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode