Game Manual - Team UPDATE - 2014-03-18

[Hallry]

Posted on the FRC Manual site, 3/18/2014: http://frc-manual.usfirst.org/Updates/0#term 176

Game Manual - Team UPDATE - 2014-03-18

Game Manual

General Announcements

As a follow up to last week’s Team Update, Team Update 2014-03-11, we strongly encourage all teams to replace any 2013, white Clippard tanks distributed via FIRST Choice last year. For Teams attending remaining events this season FIRST will supply new Clippard AVT-PP-35 tanks for trade at no cost to Teams. Please understand that these are not tanks to be used as “spares” – they are only to be traded for the 2013 white Clippard tanks that are currently on your Robot.

If you’re using the white Clippard tanks on your Robot, please check in with the Inspectors at your event as we’re having new tanks shipped to their attention.

For those teams that will not be attending any more events this season, did not participate in Clippard’s trade program last year, and are thus still using the 2013 white Clippard tanks, please contact frcparts@usfirst.org and we work with you to trade tanks after the 2014 FIRST Championship.

We’d like to thank Clippard Instruments Laboratory, Inc. for their rapid response to the tank concerns last year and for their continued support to mitigate safety concerns. They have been a long-time, generous Supplier to the FIRST Robotics Competition, and their generosity is greatly appreciated.

Section 3.1.2: MATCH Logistics
If an ALLIANCE’S BALL becomes stuck in or permanently trapped by an ALLIANCE’S ROBOT, the ALLIANCE may signal to the Head Referee that the BALL is “dead” by holding the yellow “DEAD BALL” placard against the DRIVER STATION acrylic.

If an ALLIANCE’S BALL becomes stuck in or permanently trapped by an opposing ALLIANCE’S ROBOT, the Head Referee will signal an extended infraction of G12 (the assumption is that the ALLIANCE has already been penalized for the initial G12 infraction).

Section 3.2.3: General Rules
G12

An ALLIANCE may not POSSESS their opponent’s BALLS. The following criteria define POSSESSION:

1. “carrying” (moving while supporting BALLS in or on the ROBOT or holding the BALL in or on the ROBOT),
2. “herding” (repeated pushing or bumping),
3. “launching” (impelling BALLS to a desired location or direction via a MECHANISM in motion relative to the ROBOT), or
4. “trapping” (overt isolation or holding one or more BALLS against a FIELD element or ROBOT in an attempt to shield them).

Violation: FOUL, if unintentional and inconsequential (i.e. does not significantly impact MATCH play). TECHNICAL FOUL per consequential instance. TECHNICAL FOUL per extended instance. If extended, another TECHNICAL FOUL. If strategic, RED CARD for the ALLIANCE.



Section 4.1: General ROBOT Design
R1

Each registered FRC team may enter only one (1) ROBOT (or ‘Robot’, which to a reasonably astute observer, is a Robot built for FRC) into the 2014 FRC. A Robot is any The ROBOT must be built by the FRC Team to perform specific tasks when competing in AERIAL ASSIST. The ROBOT must include all of the basic systems required to be an active participant in the game – power, communications, control, and mobility. The ROBOT implementation must obviously follow a design approach intended to play AERIAL ASSIST (e.g. a box of unassembled parts placed on the FIELD, or a ROBOT designed to play a different game would not satisfy this definition).

Section 4.8 Power Distribution
R31

The only legal source of electrical energy for the ROBOT during the competition, the ROBOT battery, is one of the following approved 12VDC non-spillable lead acid batteries:

1. Enersys (P/N: NP18-12)
2. MK Battery (P/N: ES17-12)
3. Battery Mart (P/N: SLA-12V18)
4. Sigma (P/N: SP12-18)
5. Universal Battery (P/N: UB12180)
6. Power Patrol (P/N: SLA1116)
7. Werker Battery (P/N: WKA12-18NB)
8. Power Sonic (P/N: PS-12180 NB)
9. Yuasa (P/N: NP18-12B)
   
10. Panasonic LC-RD-1217
11. Interstate Batteries BSL1116
12. Enersys (P/N: NP18-12BFR)
13. Enersys (P/N: NP18-12B)

Exception: Batteries integral to and part of a COTS computing device or self-contained camera are also permitted (e.g. laptop batteries), provided they’re only used to power the COTS computing device and any peripheral COTS USB input devices connected to the COTS computing device and they must be securely fastened to the ROBOT.


To seek approval for an equivalent battery, please contact frcparts@usfirst.org with the battery supplier and part number. Approved batteries will be added to the list above.