|
|
|
 I'm basically only posting this so that future Shaker Robotics kids will see it and tell themselves "never again"... - Chris is me [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools |
Rating: 
|
Display Modes |
|
|
|
| I'm basically only posting this so that future Shaker Robotics kids will see it and tell themselves "never again"... - Chris is me [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools |
Rating:
|
Display Modes |
|
#9
19-03-2014, 07:02
|
|||
|
|||
|
Re: Possible FMS problems.
The cRIO does not have a shock sensor. The data sheet showing the shock and vibe testing is here .. http://sine.ni.com/ds/app/doc/p/id/ds-354/lang/en.
If you are in a relatively static-free environment, you can clean debris from the cRIO in about five minutes. I almost always find lots of glitter and wire bits. I have seen cases where the reboots ceased for the remainder of the matches. I have also seen cases where nothing improved. Procedure link is below. http://digital.ni.com/public.nsf/all...257673007935A1 Greg McKaskle 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode