|
|
|
 I am a geek and proud of it. - +()c|D [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| I am a geek and proud of it. - +()c|D [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Datasheets for roboRIO
What datasheets have been made available for the roboRIO? I don't really see anything of actual use here: https://decibel.ni.com/content/docs/DOC-30419, mostly just marketing garbage. I'm guessing it's fairly similar to the myRIO, but I really don't want to bank on it. I'm interested in making custom circuits for the MXP expansion, but I don't know how fast stuff like the SPI bus can rx/tx data. Also, specifics about the ADCs and DACs would be of interest.
|
|
#2
23-03-2014, 13:46
|
||||||
|
||||||
|
Re: Datasheets for roboRIO
I suspect the specifications will be very similar to the myRIO. For the ADC, the roboRIO is 12bit in the range 0-5v, which will give better resolution for most sensors compared to the cRIO (The 9201 is 12 bit in the range of -10 to 10v).
|
|
#3
23-03-2014, 13:54
|
||||
|
||||
|
Re: Datasheets for roboRIO
The roboRIO is still in the alpha testing phase. I suspect that NI will release more information later, perhaps during/after Championships.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
