Acquiring 120 tooth 9mm HTD belts

[AllenGregoryIV]

Originally Posted by ksafin

Anywhere we can buy some 120 tooth 5mm pitch 9mm width HTD belts?

We bought them for VexPro and they're currently out of stock and we need to get some for our practice bot.

Did you call WCproducts or The Robot Place? They sometimes have them even if VEX is out of stock.

[Mr. Mike]

Check out Applied Industrial Technologies

On their website they list belts from Speed Control, Inc
In stock
Part #600-5M09
Item#: 7089861
$9.50 each

[nick1023]

I have. I found one and purchased it from wcproducts.

http://www.beltcorp.com/index.html is able to custom make some 8.5mm width 120 belts for me at 6.50 or so a piece with a 2 day turn around. I'll post how they work out in case someone else comes looking for the same.

Thanks for the replies!

[Ricky Q.]

FYI - we'll have more of most of our 9mm and 15mm belts back in stock in the next 1-2 weeks. Hopefully closer to the 1 week side of that.

Best,
Ricky

[Aren_Hill]

All,

This was a bit of an oversight/late realization on my part, when we next reorder the pulleys for 15mm wide belt they will be sized such that 2x standard 9mm wide belts fit on them.

It was a late idea that RC from WCP had to fit double belts and we solved it by adjusting the tolerance to drop to 8.5mm wide.

As Ricky said, they will be back in stock soon.

-Aren

[Ricky Q.]

We have 120T, 9mm belts - along with a few others of both 9mm and 15mm - back In Stock now.

http://www.vexrobotics.com/htdbelts9.html